2021-10-30 Materials

nitto501L,NITTO 501L

A double-sided adhesive tape made by impregnating a pressure-sensitive adhesive on a soft non-woven fabric.
It can be used for foam materials such as ethers and ester polyurethane foams, and can be used for roll sticking, stamping processing, etc., with good workability and processability.

Features
Excellent adhesion to rough surfaces.
It has good low-temperature adhesion and can also exert stable performance in winter.
It has good resilience resistance and can prevent the curved part of the foam from lifting.

※The thickness of the peeling layer is not included in the tape thickness.

Characteristics

Thickness [mm] 0.16

180° Peel adhesion force [N/20mm] 10.0

Substrate non-woven Cloth

※The 180° peel test is done under the conditions of PET#25 mounting and stretching speed of 300mm/min.
※ The above data is only an example of the measured value and is not a guaranteed value.

Use
Used to bond polyurethane foam and other foam materials.

Figures are from publicly available OEM technical data sheets (TDS) for reference only. Confirm against OEM data and measured samples. For samples, test reports, or die-cutting plans,Contact。
NITTO,nitto501L,NITTO 501L
上篇:暂无

Published specs are a reference;
measured results are what count.

The same roll can differ by ~30% bonding stainless steel vs ABS. If you're unsure, send samples—we'll run comparative tests on your substrate.

→ Request samples