Turn brand materials
Made intointo line-readyparts.
3M, NITTO, TESA, INOAC, PORON and other brand materials kept in stock. Die cutting, laminating, adhesive backing, slitting, and taping to print—one supplier through delivery. Material, process, and lead time are clear on the same quote.
Six processes—none outsourced
Slitting, die cutting, laminating, adhesive backing, blanking, and taping all run in our own workshop. You don't shuttle drawings among a materials vendor, a converter, and a packer—tolerances and accountability stay on one line.

Flatbed die cutting
Sheet and roll stock—complex contours, inner holes, and kiss-cuts in one hit.
- ConvertingBased on
- Drawing / Sample
- Kiss-cut
- Supported

Rotary die cutting
High-volume continuous rotary cutting on roll stock—stable cycle time for long runs and annual contracts.
- Form
- Roll-to-roll
- Suitable
- Long runs / annual contracts

Precision slitting
Mother rolls slit to narrow widths; clean, burr-free edges; rewind or stack.
- Output
- Rewind / stack
- Edge
- Clean, burr-free

Laminating & backing
Foam + adhesive + release film multi-layer laminates; peel tuned to your assembly process.
- Layers
- Multi-layer
- Release liner
- Optional

Blanking & gaskets
Seals, cushions, and shielding parts—from drawings or sample replication.
- Based on
- Drawing / sample
- Materials
- Foam / Rubber / Film

Spooling & taping
Small parts on reels and carrier tape—ready for pick-and-place and automated assembly.
- Packaging
- Reel / Carrier tape
- Interface
- Pick-and-place
Common grades, thicknesses & alternates
Three part types quoted most often
Brands we keep in stock
Start with where it mounts, then what to use
Automotive
Trim · nameplates · interior fixingsElectronics & electrical
Cushioning · insulation · thermalSignage & labels
Drill-free wall mount · outdoor weatherabilityBuilding windows & doors
Sealing · sound control · vibration dampingAppliances
Panel bonding · noise reductionTelecom equipment
Shielding · sealing · thermalHow processes and materials combine
The same process behaves differently on different materials. Combinations are set after reviewing the drawing, material behavior, and volume. Uncertain structures get sampled first.
Grade data & selection notes
PSB vs NAB | SEKISUI 5200 Waterproof PE Foam Tape Selection Guide
SEKISUI 5200 Series Waterproof PE Foam Tape | Full Model Index (7 Types, 37 Model
PTFE Film Adhesive Tapes with High Elongation
How to check the appearance of non-dried collagen material
3M 4991B VHB TAPE DATA SHEET
Nitto541,NITTO 541
Send a drawing,
see what we can do first.
Drawing + volume + lead time—we'll reply with a material plan, tolerances, and price. No drawing? Ship a sample or describe the conditions.