1. PORON 4701-60-20125-04
PORON 4701-60-20125-04 Microcellular Polyurethane Foam — 3.18 mm, Shore O 55
PORON | ROGERSREF · 561
PORON | ROGERS 561

PORON 4701-60-20125-04

PORON 4701-60-20125-04 — microcellular polyurethane foam, 3.18 mm, Shore O 55 (Shore A 42). Die-cut to drawing; sheets and rolls. Not for structural loads.

Thickness
3.18
Color
Usually black
Category
Polyurethane foam
01 / TechnicalParameters

Spec overview

Values below are nominal with common converting forms. Actual tolerance, peel, and temperature performance vary with substrate, surface energy, and coat weight—confirm under your conditions before volume.

Brand / seriesPORON | ROGERS
CategoryPolyurethane foam
Nominal thickness3.18
ColorUsually black
SizeCustomized on request
Elongation0.25
HardnessShore O 55 (Shore A 42)
NotesFor more physical properties, please contact us for the physical property table
ConvertingDie cutting · blanking · slitting
Inspection100% inspection / AQL sampling
Trade termsFOB · CNF · CIF · DDP
Supply formFull rolls · slit rolls · die-cut parts
4701-60-20125-04 is a microcellular polyurethane foam from PORON (Rogers Corporation), supplied in 3.18 mm thickness in black and a hardness of Shore O 55 (Shore A 42). The foam is compressible and conforms to uneven surfaces, so it absorbs impact energy and takes up tolerance between mating parts — the reason it is specified for sealing, gasketing, cushioning and vibration isolation rather than for carrying load. Typical applications include display and housing gaskets in consumer electronics, control-cabinet and electrical-equipment isolation pads, sensor and battery cushioning, and automotive or aviation interior trim. 4701-60-20125-04 is stocked as sheets and rolls, and we die-cut, laminate and kiss-cut it to your drawing; thickness, hardness and sheet size can be customized on request. Send the drawing with the tolerance you need and we quote to that specification. Not intended as a structural load-bearing component.
02 / Features

Why use it

Foam carriers aren't about "sticking harder"—they combine fastening, sealing, and cushioning in one step, replacing screws and clips.

  • high elasticity and wear resistance, and can quickly restore to the original state under high pressure.
  • good energy absorption performance, can absorb energy and reduce the damage of the impact and vibration.
  • high durability, not easy aging and deformation, long service life.
  • good temperature stability and chemical stability, suitable for the use of harsh environments.
  • 03 / Applications

    Where it's commonly used

    Depending on carrier and adhesion, these materials show up in enclosure cushioning, panel sealing, interior bonding, and temporary hold. Confirm for your actual conditions.

    PORON 4701-60-20125-04 can be used in a variety of high-end applications, such as electronics, communications, medical, sports and aerospace, etc., common applications include:
  • phone and tablet cushion and gasket.
  • aerospace equipment antivibration pad and sealing material.
  • medical equipment shock absorption mat and insulator.
  • sport insoles and knee cushion.
  • all kinds of high-end instrumentation and electronic equipment of shock and vibration damping materials
  • Other notes

    For Rogers PORON 4701-60-20125-04, the material we can provide professional advice and information, and can provide professional die cutting customization service for you.
    04 / OptionalConverting

    What we can make from a full roll

    Buy full rolls and cut yourself, or take finished parts—both work. Finished parts are tooled to print; lead time includes the die and first-article approval.

    Die-cut forming

    Irregular contours, inner holes, and nested arrays—from CAD drawings or samples.

    FLATBED / ROTARY

    SlittingRewind

    Slit full rolls to the width you need; narrow rolls go straight to the laminating line.

    SLITTING

    LaminatingRelease liner

    Change release paper or film to match how the next process peels.

    LAMINATING

    Carrier tapePackaging

    Small parts on carrier tape / reels—ready for pick-and-place and automated assembly.

    SPOOLING

    Full rolls, or finished parts?
    We'll quote both.

    Send drawings or usage volume—we'll reply with a material plan, converting method, lead time, and price. Alternate-grade comparisons available on request.

    → Quote this grade