1. PORON 4790-92-15120-04P
PORON 4790-92-15120-04P Microcellular Polyurethane Foam — 3.05 mm, Shore O 2
PORON | ROGERSREF · 490
PORON | ROGERS 490

PORON 4790-92-15120-04P

PORON 4790-92-15120-04P — microcellular polyurethane foam, 3.05 mm, Shore O 2. Die-cut to drawing; sheets and rolls. Not for structural loads.

Thickness
3.05
Color
Usually black
Category
Polyurethane foam
01 / TechnicalParameters

Spec overview

Values below are nominal with common converting forms. Actual tolerance, peel, and temperature performance vary with substrate, surface energy, and coat weight—confirm under your conditions before volume.

Brand / seriesPORON | ROGERS
CategoryPolyurethane foam
Nominal thickness3.05
ColorUsually black
SizeCustomized on request
Elongation0.08
HardnessShore O 2
NotesFor more physical properties, please contact us for the physical property table
ConvertingDie cutting · blanking · slitting
Inspection100% inspection / AQL sampling
Trade termsFOB · CNF · CIF · DDP
Supply formFull rolls · slit rolls · die-cut parts
4790-92-15120-04P is a microcellular polyurethane foam from PORON (Rogers Corporation), supplied in 3.05 mm thickness in black and a hardness of Shore O 2. The foam is compressible and conforms to uneven surfaces, so it absorbs impact energy and takes up tolerance between mating parts — the reason it is specified for sealing, gasketing, cushioning and vibration isolation rather than for carrying load. Typical applications include display and housing gaskets in consumer electronics, control-cabinet and electrical-equipment isolation pads, sensor and battery cushioning, and automotive or aviation interior trim. 4790-92-15120-04P is stocked as sheets and rolls, and we die-cut, laminate and kiss-cut it to your drawing; thickness, hardness and sheet size can be customized on request. Send the drawing with the tolerance you need and we quote to that specification. Not intended as a structural load-bearing component.
02 / Features

Why use it

Foam carriers aren't about "sticking harder"—they combine fastening, sealing, and cushioning in one step, replacing screws and clips.

  • high performance buffer: PORON 4790-92-15120-04 p can provide excellent buffering effect, can reduce impact and vibration, to protect product from damage.
  • high elasticity and durability: PORON 4790-92-15120-04 p has high resilience and durability, the performance of can remain stable for a long time.
  • heat sensitive properties: PORON 4790-92-15120-04 p adopted unique heat sensitive technology, could be changed with the temperature, hardness, and provide more accurate buffer and damping performance.
  • heat resistance and chemical resistance, PORON, 4790-92-15120-04 p can be in wide temperature range and stable performance, and it has good chemical resistance.
  • multi-purpose: PORON 4790-92-15120-04 p can be used in a variety of fields, such as electronic products, medical equipment, industrial equipment, etc.
  • 03 / Applications

    Where it's commonly used

    Depending on carrier and adhesion, these materials show up in enclosure cushioning, panel sealing, interior bonding, and temporary hold. Confirm for your actual conditions.

  • electronic products: PORON 4790-92-15120-04P can be used in the manufacture of electronic products, such as mobile phone, computer, digital camera, etc., provides excellent cushioning and protection performance.
  • medical equipment: PORON 4790-92-15120-04P can be used in medical equipment, such as prostheses and orthoses, provides excellent cushioning and support.
  • industrial equipment: PORON 4790-92-15120-04P can be used to industrial equipment, such as machinery, instruments and meters, etc., to provide excellent buffering and damping performance.
  • other areas: PORON 4790-92-15120-04P can also be used in automotive, aerospace, construction and other fields, to provide high strength and durability of the protection performance.
  • Other notes

    For the 4790-92-15120-04P, the material we can provide professional advice and information, and can provide you with professional die cutting custom services.
    04 / OptionalConverting

    What we can make from a full roll

    Buy full rolls and cut yourself, or take finished parts—both work. Finished parts are tooled to print; lead time includes the die and first-article approval.

    Die-cut forming

    Irregular contours, inner holes, and nested arrays—from CAD drawings or samples.

    FLATBED / ROTARY

    SlittingRewind

    Slit full rolls to the width you need; narrow rolls go straight to the laminating line.

    SLITTING

    LaminatingRelease liner

    Change release paper or film to match how the next process peels.

    LAMINATING

    Carrier tapePackaging

    Small parts on carrier tape / reels—ready for pick-and-place and automated assembly.

    SPOOLING

    Full rolls, or finished parts?
    We'll quote both.

    Send drawings or usage volume—we'll reply with a material plan, converting method, lead time, and price. Alternate-grade comparisons available on request.

    → Quote this grade